Archive for category Restaurants
DIY: Back Wall Diffuser Array/Bass Trap
Posted by Acoustics First in Absorption, Auditorium, Broadcast Facilities, Diffusion, DIY, Home Entertainment, Home Theater, HOW TO, Media Room, Multipurpose Rooms, Music Rehearsal Spaces, Music Tracking Room, Product Applications, Products, Recording Facilities, Recording Studio, Restaurants, Studio Control Room, Teleconferencing, Theater, Vocal Booth, Voice Over, Worship Facilities on June 20, 2013
Getting more out of your back wall diffuser array with a simple hanging DIY array/bass trap.
One of the big “back wall” questions people have is “If I have a large diffuser array, how can I get the bass trapping I need?” A great answer to this question is to turn the entire array into a hanging bass absorber. If you are already planning on getting diffusion for your back wall, here is a great way to use that wall space for more than just diffusion.
Stuff you need:
- 4’x 8’ sheet of 3/4” Plywood
- 32 sq/ft of 4” Cutting Wedge® Classic Foam (Or similar absorber)
- 8 x Art Diffusers® – Model C (or Model F, Quadrapyramid™, or other comparable diffuser)
- 2 x IsoHangers
- 2 x Heavy rings (Think big Curtain Rings or Hanging Wire will also work)
- 2x Closet Rod/Shelf Brackets
- 2 x 7/8” wood screws and fender washers
- Construction Adhesive (Make sure it’s safe for Foam)
Assembly instructions
- Screw the two IsoHangers to the plywood, using a fender washer on each screw. These should be about an inch in from each end -drill small pilot holes first. (These will be used to hang the panel, this side will be designated as the back from here on out.)
- Use Construction adhesive to attach the Cutting Wedge® Foam to the back of the panel in a checkerboard pattern (each panel 90° rotated from adjacent)
- Use Construction adhesive again to attach the 8 Diffusers to the front of the Plywood (Follow the installation instructions for adhesive placement)
- Attach the Rings or Wire to the free end of the IsoHangers.
What you have created is a hanging panel that will diffuse mid-high frequencies and trap the lows. The hanging mass absorbs low frequency energy by moving slightly when pushed by the energy of the Low frequency Waves. The rear facing fiberglass also absorbs low frequencies by dampening the panel, but it also absorbs any of the waves that happen to get trapped behind the panel.
Hanging the Diffuser/Trap Assembly
- Measure and attach the Closet Brackets to the Wall – Use appropriate anchors! If you have standard or double wall construction without Resilient Channels, use the studs – The IsoHangers will keep vibrations from transmitting through the wall.
- Hang the panel on the Closet Brackets using the rings/wire with the Diffusers facing you and that’s it!
This simple DIY project is provided as a way for our customers to learn better ways to use our products and get more value out of the products they buy. For those customers who are planning on purchasing diffusers to make an array, or maybe already have an array and are looking to try a new configuration – this project may be what you’re looking for.
A little History…
If you embark on this little construction project, you will be constructing studio elements that have remained basically unchanged since at least the early 1970’s. Hanging plywood wrapped in studio foam or fiberglass has been used “behind the curtains” of many of the top studios for effective bass control for over 40 years – just no one has ever seen it, as it has been hidden in walls; masked as a false wall of fabric stretched across wooden louvers!
————————————————————————————————————————————————————————————
Acoustics First Corporation supplies acoustical panels and soundproofing materials to control sound and eliminate noise in commercial, residential, government, and institutional applications worldwide. Products include the patented Art Diffusor®, sound absorbers, noise barriers, acoustical fabrics and accessories. Acoustics First® products are sold for O.E.M applications, direct, and through dealers. For more information on acoustical materials and their application, please visit www.AcousticsFirst.com or call Toll Free 1-888-765-2900 (US & Canada).
Acoustics First’s acoustical wall fabric saves $Green$ while being Green!
Posted by Acoustics First in Art Galleries, Auditorium, Broadcast Facilities, Classrooms, Fitness, Government, Gymnasium, Home Entertainment, Hospitals, Medical Facilites, Multipurpose Rooms, Museums, Music Rehearsal Spaces, Offices, Press Release, Products, Recording Facilities, Restaurants, School & Educational Facilities, Studio Control Room, Teaching Rooms, Teleconferencing, Theater, Universities, Vocal Booth, Voice Over, Worship Facilities on October 18, 2012
For Immediate Release
Acoustical wall fabric saves $Green$ while being Green!
Sound Channels® acoustical wall fabric is manufactured from 100% Post-Consumer Recycled material, making this a quick ship, easy, no thought acoustic solution.
Sound Channels® is applied directly to vertical surfaces, is easy to cut and installs like wall carpet. This absorptive wall fabric is a great choice to moderate speech frequencies in any application. Great to soften sound in conference rooms, distance learning, offices, and day care facilities, this material can also be used as a base layer in home theaters, recording studios and broadcast facilities.
Not only is this economical acoustical treatment available in countless colors, it is manufactured from recycled materials, reducing environmental impact!
Sound Channels in manufactured using Eco-fi fibers. Eco-fi is a high-quality polyester fiber made from 100% certified recycled plastic bottles. It can go into any textile product such as clothing, blankets, carpets, wall coverings, auto interiors, home furnishings, and craft felt. Eco-fi can also be blended with other fibers, such as cotton or wool, for enhanced qualities.
AN EASY GUIDE: 15 bottles = 1 yard of wall covering
Why buy Eco‐fi products?
We have the capacity to keep billions of plastic bottles out of the world’s landfills each year by using post-consumer plastic bottles instead of virgin materials in the fiber manufacturing process. By doing this, we can lower harmful air emissions and save millions of barrels of oil from being used which, in turn, reduces the harmful effects of acid rain, global warming, and smog. Fabrics made from Eco-fi fiber are chemically and functionally nearly identical to those made from non-recycled fiber. The difference is that Eco-fi fiber is made without depleting the Earth’s natural resources. With properties such as strength, softness, shrinkage-resistance, and colorfastness, market applications for Eco-fi products are expanding every day.
Click here for more information on the Sound Channels acoustical wall fabric.
http://www.acousticsfirst.com/sound-channels-wall-covering.htm
——————————————————————————————————————————————-
Acoustics First Corporation supplies acoustical panels and soundproofing materials to control sound and eliminate noise in commercial, residential, government, and institutional applications worldwide. Products include the patented Art Diffusor®, sound absorbers, noise barriers, acoustical fabrics and accessories. Acoustics First® products are sold for O.E.M applications, direct, and through dealers. For more information on acoustical materials and their application, please visit www.AcousticsFirst.com or call Toll Free 1-888-765-2900 (US & Canada).
www.AcousticsFirst.com Acoustics First Corporation PH: (804) 342-2900 |
Sign up for Future Press Releases![]() http://eepurl.com/hxZCs |
Baffled by Acoustical Ceiling Treatments?
Posted by Acoustics First in Animal Shelters, Art Galleries, Auditorium, Construction Sites, Fitness, Gymnasium, Industrial Facilities, Multipurpose Rooms, Museums, Press Release, Products, Restaurants, School & Educational Facilities, Theater, Universities, Worship Facilities on June 7, 2012

Cloudscape Ceiling Baffle (CSBF15P) 4’x2′ x 1.5″
Acoustics First® adds more ways to get ‘Baffled’ and improve large room acoustics.
Acoustics First® has ‘amped up’ the Cloudscape® line of ceiling baffles. These acoustical baffles reduce reverberation in applications such as gymnasiums, auditoriums, performance venues, theaters and restaurants. They can be suspended from open truss and pre-engineered suspension systems or alternatively mounted direct to a roof deck or wall. In addition to the standard 4’x2′ x1.5″ PVC encapsulated ‘echo-nomical’ baffle, Acoustics First® has expanded the selection to include three alternate finishes. If you wish to upgrade the size of the standard PVC Cloudscape® Ceiling Baffle, we now have a 2″ thick option available in sizes up to 4’x10′, with some limitations. If you wish to upgrade the finish, you can choose the durable rip-stop nylon sailcloth, product code CSBF2S with 9 color choices. If sailcloth doesn’t ‘float your boat’, choose the fabric encapsulated Cloudscape® Baffle. The CSBF2F is encapsulated in a sewn Guilford of Maine® FR701® fabric and will coordinate with the Sonora® ridgid acoustical wall panels. The acoustical ceiling baffles are extended even further with an offering of exterior grade fabric for outdoor applications. Overall, you now have 4 choices of baffle configurations, more sizes and 96 finish options. Additionally, all the 2″ thick options use environmentally friendly Ecose® glass fiber. For more information or to receive a quotation, please contact Acoustics First® via email, info@acousticsfirst.com, or call Toll Free 1-888-765-2900 (US & Canada).

Cloudscape Ceiling Baffle (CSBF2S) Sailcloth

Cloudscape Ceiling Baffle (CSBF2F) Fabric
You must be logged in to post a comment.