Posts Tagged Sound diffuser

Introducing the Aeolian™ Diffuser

Production Unit – Photo

Acoustics First® is pleased to announce our latest creation: The Aeolian™ Sound Diffuser. In some ways a simplified version of our popular Art Diffusor® Model D, the Aeolian™ is the latest in our line of ‘Organic Quadratics’. Part of the Aeolian’s™ unique design comes from its use of “implied symmetry”. Although the edges are all asymmetric, the height variations are just subtle enough to create an illusion of symmetry when installed in a standard 15/16” grid, or spaced appropriately on a wall. The lack of a uniform edge also has added acoustical benefits in the way of “randomness”.

3D Development Model

Simulations are compared to final test results before production. (Test result by NWAA Labs.)

The development process for the Aeolian™ was similar to that of our ‘Model D’. Various 3D models were created and refined, after which we ran acoustical simulations. Once we settled on what we considered the optimum design for what we were going for, a full scale 3D model was printed for lab testing. With the ‘real world’ test results in hand, confirming our predicted results, we set about making the final mold, and this new diffuser was born.

Pre-Production Prototype printing on the Gigabot

Aeolian Mold.

 

First batch of Aeolians!

 

The Aeolian™ Diffuser is class A thermoplastic, and 4 lbs. per unit.
Nominal size is 23-3/4” x 23-3/4” with a depth of 5.1”.

Download the Aeolian™ Diffuser Data.

, , , , , , , , , , , , , ,

Leave a comment

Comprehensive Diffuser Data Now Available!

Figure 1 – 3D Polar “Balloons” are used to display a full hemispheric acoustic level response, at specific frequencies, in front of the diffusive surface. This is how a 5000Hz signal would reflect off an Art Diffusor® Model D: If we could see acoustic energy, this is what it might look like!

3D Polar “Balloons” are used to display a full hemispheric acoustic level response, at specific frequencies, in front of the diffusive surface. This is how a 5000Hz signal would reflect off an Art Diffusor® Model D: If we could see acoustic energy, this is what it might look like!

Acoustics First® has long been at the forefront of many exciting developments in the world of sound diffusion. In the spring of 2015, we created a method to evaluate sound diffusers using particle computer simulations. Then we utilized 3D printing technology to streamline the development of new diffuser prototypes. Recently, we received a patent for our innovative Art Diffusor® Model D design. Now we’re excited to announce the release of a new comprehensive data booklet for our entire line of sound diffusers!

In essence, this booklet represents an entirely new way to view and compare sound diffusers. “With technological advances accelerating at a staggering rate, we believed it would be advantageous to compile all of the measurable acoustic parameters of these devices, in order to develop an operating profile for each.” Since sound absorption and sound reflection can both be measured with great accuracy, we foresee a use for this data, or similar data, in virtual acoustic room modeling, along with other useful applications.


Contact us for your own print copy of the Acoustics First Diffuser Data booklet (or click here to download the PDF). The electronic data that was used to create the polar diffusion balloons is also available per request (Data compiled for Acoustics First by NWAA Labs in Elma, WA).
Currently, we are working closely with other members of the industry in an effort to develop a universally accepted standard for testing sound diffusion. In the absence of such a standard, Acoustics First is presenting this data in good faith as we believe it represents the best of what is currently available.

We look forward to sharing more advances in the field of sound diffusion!

, , , , , , , , , , ,

Leave a comment

Barrett’s Technology Solutions has a Happy Easter

Sometimes at Acoustics First we get a call from someone who is so knowledgeable that we can’t help but be tickled that they called us to help them.  We received one such phone call from Pete Heskin at Barrett’s Technology Solutions  in Naperville, IL.

Pete and his team were putting together an acoustic treatment for a listening room at their facility and wanted the room’s acoustics to really showcase their lineup of high-end audiophile speakers.  No joke here – these guys have over 50 years of experience in the audio industry – and they keep on the bleeding edge of audio and video.  This treatment is serious acoustic business – and these are some of the most discriminating ears in audio.

Happy Easter guys!

Happy Easter Guys!

Happy Easter Guys!

In keeping with their high-standards and cutting edge approach, they were looking for an acoustic treatment that is as visually stunning as it is capable of treating a room containing some of the world’s greatest sound sources. As you can see, the results are simple and elegant.

The room contains an array of Sonora® panels, Silent Pictures® and clusters of ArtDiffusor® Model D‘s to make this space sound as good as it looks.  (While all of their gear makes the gear junkies at Acoustics First drool…)

So, if you find yourself near Chicago, or on a “Wayne’s World” pilgrimage,  stop into Barrett’s – and if you fancy yourself an audiophile – put your money where your ears are, and hear how discriminating ears listen to music…

… No Stairway to Heaven.

 

, , , , , , , , , , ,

Leave a comment

Model D @ DesignDC & WBWV

That’s right. Acoustics First will be unfurling some of the wrapping and exposing the newest addition to the ArtDiffusor® Family of diffusers… the Model D.  Where can you see it?

DesignDC 2013 - September 25-26, 2013

DesignDC 2013

 September 25-26th, 2013
  Walter E. Washington Convention Center, Washington DC

Acoustics First will be set up in the main exhibit hall (in Booth 507), showing off the Model D, the newest release into the ArtDiffusor® family.  Come on down to see for yourself what all the noise is about – pardon the pun.

Another interesting development is the first install of Model D’s in a Broadcast studio.  In a move to “liven-up” the very “dead” studio to better accommodate the live recording of in-studio musicians, WBWV 88.7 FM in Beckley, WV pointed to the New Model D as their solution.

The Sound, 88.7 fm Beckley, WV

WBWV 88.7 FM Beckley, WV

FInally, don’t forget that you can check out any new developments or products at Acousticsfirst.com, where the Model D page has a couple “Bonus Features”  like:

, , , , , , , , , , ,

Leave a comment

DIY: Back Wall Diffuser Array/Bass Trap

Getting more out of your back wall diffuser array with a simple hanging DIY array/bass trap.

One of the big “back wall” questions people have is “If I have a large diffuser array, how can I get the bass trapping I need?”  A great answer to this question is to turn the entire array into a hanging bass absorber.  If you are already planning on getting diffusion for your back wall, here is a great way to use that wall space for more than just diffusion.

Stuff you need:

bass trap foam diffuser -decon- front

Assembly instructionsbass trap foam diffuser - side

  • Screw the two IsoHangers to the plywood, using a fender washer on each screw. These should be about an inch in from each end -drill small pilot holes first. (These will be used to hang the panel, this side will be designated as the back from here on out.)
  • Use Construction adhesive to attach the Cutting Wedge® Foam to the back of the panel in a checkerboard pattern (each panel 90° rotated from adjacent)
  • Use Construction adhesive again to attach the 8 Diffusers to the front of the Plywood (Follow the installation instructions for adhesive placement)
  • Attach the Rings or Wire to the free end of the IsoHangers.

What you have created is a hanging panel that will diffuse mid-high frequencies and trap the lows.  The hanging mass absorbs low frequency energy by moving slightly when pushed by the energy of the Low frequency Waves.  The rear facing fiberglass also absorbs low frequencies by dampening the panel, but it also absorbs any of the waves that happen to get trapped behind the panel.

bass trap foam diffuser - rear

Hanging the Diffuser/Trap Assembly

  • Measure and attach the Closet Brackets to the Wall – Use appropriate anchors!  If you have standard or double wall construction without Resilient Channels, use the studs – The IsoHangers will keep vibrations from transmitting through the wall.
  • Hang the panel on the Closet Brackets using the rings/wire with the Diffusers facing you and that’s it!

bass trap foam diffuser - frontThis simple DIY project is provided as a way for our customers to learn better ways to use our products and get more value out of the products they buy.  For those customers who are planning on purchasing diffusers to make an array, or maybe already have an array and are looking to try a new configuration – this project may be what you’re looking for.

A little History…

If you embark on this little construction project, you will be constructing studio elements that have remained basically unchanged since at least the early 1970’s.  Hanging plywood wrapped in studio foam or fiberglass has been used “behind the curtains” of many of the top studios for effective bass control for over 40 years – just no one has ever seen it, as it has been hidden in walls; masked as a false wall of fabric stretched across wooden louvers!

————————————————————————————————————————————————————————————

Acoustics First Corporation supplies acoustical panels and soundproofing materials to control sound and eliminate noise in commercial, residential, government, and institutional applications worldwide.  Products include the patented Art Diffusor®, sound absorbers, noise barriers, acoustical fabrics and accessories. Acoustics First® products are sold for O.E.M applications, direct, and through dealers.  For more information on acoustical materials and their application, please visit www.AcousticsFirst.com or call Toll Free 1-888-765-2900 (US & Canada).

, , , , , , , , , , , , , , , , , , , , , ,

Leave a comment